How To Repair A Cutting Mat

Have your precious cutting mat gotten all warped and curvy? And perhaps it got fifty-fifty worse when yous tried to fix it, with the warped areas spreading all over the mat? Well, I'1000 here to offering you a elementary solution that will restore fifty-fifty badly warped mats in only a few uncomplicated steps.

What causes a warped cut mat?

The consensus on the net seems to exist either heat, storing information technology vertically or a combination of heat and moisture. And the bigger the mat, the more common the event seem to exist.

I've likewise tried to find out what the physiological reason to why cutting mats tends to warp, but have then far come upwards empty-handed (but drop me a note if you lot have the answer!).

To flatten a curled cutting mat you'll demand:

• An iron
• Lots of heavy books
• Big wood plank or cutting board
• Pressing material
• Patience 🙂

1. Printing the mat with an iron

Place a pressing material on the mat to protect the surface. Place an iron on top (I used medium heat) and press until the surface is warm to the bear on.

2. Bank check the heat of the mat

The mat should be warm to touch, but nowhere near scorching heat.

3. Place wood lath and books over the heated warped surface area

Brand sure the weights cover a large area, larger than the warp. Considering if don't you'll run the take a chance of but moving the curled area to another spot on the mat. Let the mat absurd nether pressure, I kept the weights on for a few hours to get the full effect. I likewise tried letting information technology sit down overnight, but that didn't make much of a departure.

iv. Remove the weights and check the mat

The surface should accept begun to flatten, but don't expect it to be totally apartment later your first attempt.

v. Repeat the pressing sequence

Do this every bit many times as needed. I had to repeat this four times until the mat was flat plenty for my liking.

The flattened mat

If your mat is badly curled and in several spots (like mine was) maybe it's unrealistic to wait the mat to be 100% restored to its original shape. But using the method I have shown here made a massive difference, in fact earlier I did this process, near 25% of the mat was pretty much unusable. But now I tin use the entire mat for my cutting needs again!

Video tutorial: How To Flatten A Warped Cutting Mat: Step-by-Step Tutorial

This video goes into even more particular, plus a few bonus tips on other means to prepare your curled mat.

You can as well watch the tutorial on YouTube and check out the comments with lots of awesome suggestions on how to flatten a warped cut mat.

Curious about how I built my large cutting tabular array (hint: it's an Ikea hack). Check out my tutorial on how to build your own cutting table on wheels with lots of storage.

Source: https://www.thelaststitch.com/flatten-warped-cutting-mat/

Posted by: hilliardquieron.blogspot.com

Share this post